Saltar al contenido

FREE COMPUTER HARDWARE COURSE

IMAGEN DE ENSAMBLAJE DE COMPUTADORAS / Image of COMPUTER ASSEMBLY COURSE

Free Computer Assembly Courses

A limited number of free computer repair courses and tutorials are available online through various schools and institutions. The classes are generally not offered for college credit. All courses can be taken by students at their own pace. Some knowledge of basic programming, math, and computer systems may be necessary to take full advantage of the free online resources listed below.

Click for Other Studies at Different Academic Levels

Karbosguide.com

Karbosguide can benefit people interested in learning about computer hardware/software, computer maintenance or just computers in general.

Karbosguide offers lectures on Windows, motherboards, PC architecture, chipsets and CPUs (central processing units). Many of the lectures come with illustrations and graphics.

Massachusetts Institute of Technology (MIT)

Circuits and Electronics analyzes the basic operation of circuits and possible applications for analog, digital and audio devices. Course topics include resistive elements, networks, independent and dependent sources, energy storage and applications.

Students have access to a variety of learning tools, including videos, handouts, labs, tests, and task sets. Not all reading is available online, and students may need to purchase a textbook.

Introduction to Electrical Engineering and Computer Science discusses the basic design concepts of modularity and abstraction in different electrical engineering and computer science contexts.

The course also integrates mathematical systems models as well as topics such as modern software engineering, linear systems analysis, electronic circuits and decision making.

Microsoft

Creating a system repair disc is a video presentation on how to create a system repair disc to solve or troubleshoot problems in the Windows operating system. Microsoft also provides written instructions to accompany the video.

The Microsoft Diagnostics and Recovery Toolset overview provides step-by-step instructions on how to perform various diagnostic and troubleshooting techniques on a computer or laptop.

The Microsoft Diagnostics and Recovery Toolset (DaRT) includes instructions on many of the tools needed to repair and maintain a computer such as Crash Analyzer, Disk Commander, Computer Management, Locksmith Wizard, and more.

Computer Assembly Online Courses

Computer Service I

Acs Distance Education

Become a computer technician. Learn how to repair and service computers, including laptops. This course is suitable for the beginner with a limited understanding of the inside of a computer.

Course Code VIT203

  • Duration (approx.) 100 hours.
  • Certified in computer assembly and repair.
  • Average cost of the course: $ 2731
  • Average course length: 6 months

This qualification provides skills to select components and assemble the computer to customer specifications and to perform routine hardware repairs (usually by replacement) of known defective components following prescribed routines.

Build a modern computer from the ground up: Nand a Tetris Part II (project focused course) offered by:

The Hebrew University of Jerusalem

In this project focused course, you will build a modern software hierarchy, designed to enable the translation and execution of high-level object-based languages on a computer hardware platform.

In particular, you will implement a virtual machine and compiler for a simple, Java-like programming language and develop a basic operating system to close the gaps.

PC Hardware Course Content

Online PC hardware training can provide students with the foundation they will need to enter the field of computer hardware repair and maintenance. Different training courses may vary in the subject matter they cover, but most PC hardware courses should include the following basics:

Computer Hardware: Before entering the field, students should have a thorough understanding of the various interconnected parts of a computer and how they work together. Certain courses may require students to disassemble and reassemble computers to demonstrate their intimate familiarity with PC hardware.

Troubleshooting: Students can learn how to locate and identify the sources of hardware problems, including running tests and other troubleshooting techniques. Students can also learn how to take steps to correct these problems, including replacing or upgrading problematic parts and making repairs.

Software basics: While students typically focus on addressing hardware problems, they should also be prepared to deal with software problems in their work life, as they should expect customers to contact them with any number of PC problems. These courses teach students how to identify and remove computer viruses and handle other software failures.

PC Hardware Skills Applications

Since PC hardware training courses are generally intended to prepare students directly for careers as computer technicians, all the skills they acquire in these courses can be directly applicable to their future careers.

The challenges related to hardware, troubleshooting and repair techniques are likely to be similar to those they will encounter on the job, should they choose to become technicians. However, these skills can also be useful in other careers if students choose not to follow the technician route.

The intimate knowledge that students of PC hardware should acquire in these courses is the same knowledge they would need to pursue a career as a hardware engineer, the people who work to create and design that hardware in the first place.

Knowledge of computer hardware is also extremely useful for students pursuing careers as computer software technicians, network or system administrators, or other IT support functions.

Adult Computer Assembly Courses

PC Maintenance

KS – Keeley Street

Learn how to troubleshoot and solve common computer hardware problems. Find out what’s inside a computer, how it works, and how to upgrade computer components.

Computer Hardware and Computer Assembly

Free Technical Computer Course

  • Duration: 42 hours
  • Conferences: 14
  • Level: Certificate
  • Type: Part-time
  • News Source: Sinhala

This course is designed for those who are involved in the graphic arts industry, to improve skills and knowledge in computer hardware and PC assembly. It will teach participants how to solve everyday problems in computer hardware and software and general troubleshooting in computers and peripherals.

Target group: Graphic arts industry personnel and anyone who wants to improve knowledge and skills in computer hardware, and software installation of drivers, PC assembly and general troubleshooting on computers and peripherals.

PC Maintenance Course by Tralee Institute of Technology – Tralee, Co. Kerry

  • Tralee Institute of Technology

The main objective of this program is to develop their technical and practical skills with computers.

Computer Assembly Courses for Children

Build and Code Your Own Laptop

  • Ages 10-12 years
  • Skill Level Beginner – Advanced
  • Coding, Robotics
  • Python, pi-top, Raspberry Pi

Build and code your own laptop to take home

Course description

Create a laptop in this course that combines hardware and software knowledge for a hands-on approach to computing. Students will assemble their pi-top laptop, which is theirs to take home, from a Raspberry Pi and other circuit boards.

They will learn how to troubleshoot their hardware assembly and then it is time to start the computer, which they built, to experience the excitement of Python coding. With an introduction to hardware, engineering, and coding, this course has something for everyone.

Computer Assembly Courses for Beginners

Computer/Laptop Assembly and Troubleshooting Course

Course description

Using computers / laptops is part of our daily lives today. Our children live almost half their lives on these machines. Very often there are problems with the hardware/software and we don’t know what to do next. The courses below teach you how to assemble / troubleshoot / repair your PC or upgrade your laptop.

If you want to run your Windows faster and are fed up with slow boot times or slow PCs, the courses below will help you learn how to speed up your Windows 7, Vista, XP without upgrading any hardware.

Don’t understand the basics of your computer and how to solve various simple problems ?

Do you have no idea of the parts inside the PC/Laptop and how to replace/add new ones ?

Do you always get stuck in a computer repair shop and have to believe their ‘story’ because you don’t know what they are talking about ?

See a lot of different types of hardware and hear a lot of jargon like dual core, DDR3 Ram, Sata Hard Disk, USB Hub, etc. but have no idea what this means and how it benefits or applies to you or your machine?

I always wanted to understand the basic components of a PC/laptop and how to perform basic troubleshooting: you will be surprised to learn that most of the time you can fix things on your own, you don’t even have to go to the repair shop. «This will only save you enough money to cover the cost of this course.

Do you want your computer to run faster? Are you tired of being so slow, but have no idea how to solve that ?

Always infect your computer with viruses and crashes, do you have to reinstall ?

Your PC/laptop is now dead slow, but it was fast when you bought it, don’t you know what to do next to make it faster ?

You want to upgrade your machine yourself, so you want to buy a part and add it yourself.

Learn all of the above and more in this interesting hands-on workshop, where you can set things up live and not just watch a boring PowerPoint presentation.

Understanding and Troubleshooting Hardware

  • Several types available and differences: AMD, Intel, Atom, Arm, Mac
  • Single / Dual / Quad / Multi Core, multi-process
  • OnChip Cache and its advantages
  • Different speeds available and what they mean
  • 32-bit Vs 64-bit, which one to choose, why?

How to Choose a CPU Type for Different Needs ?

BIOS Course and Ports

How to configure the BIOS.

  • How to adjust your computer to work very fast on Win 7 and Win XP
  • Different ports and why we use them – USB, PS2, DivX
  • How to set the startup password for your computer.
  • Adding New Parts to the Computer
  • Basic problem solving
  • Adding new hard drive or RAM to yourself
  • Wiring your computer, inside the CPU.
  • Course of Configuration of your computer to execute FASTWe will show you how to configure various parts of your computer/laptop to run very fast and load applications faster than ever.

Advanced Computer Assembly Courses

PC Repair and Upgrade – IT Diploma Computer Training Course

  • Distance learning, PC maintenance course by Kilroy’s College – Dublin
  • Kilroy University
  • If you plan to start working on PC repairs, or are simply interested in computers and how they work, then this course may be for you.

PC Repair Course

  • Classroom-based, PC maintenance course by IACT International Academy of Computer Training – Dublin
    IACT International Academy of Computer Training
  • This PC repair course begins by reviewing common components installed on modern PCs. We also analyze common operating systems in use today, and learn how to install and configure software and hardware.

Certified PC, Hardware and Networking Course

  • Nielit
  • Introduction to PC H/W, installation and configuration of H/W, PC debugging, troubleshooting and maintenance, installation and configuration of S/W, baseline and network configuration
  • Duration 80 hrs.

Certified Course in PC Assembly and Maintenance

  • Nielit
  • Basic computer and I/O devices, monitor studio, memory, motherboard and hard drive I/O ports, graphics card, printer installation, modem, operating system and scanner, network basics
  • Duration 80 hrs.

Computer Assembly Courses For Download

  • PC Assembly
  • PC Assembly is on a computer like the world. Your job is to collect parts of the computer to move on to the next stage, while avoiding the enemies who will try to stop you.
  • PC Assembly is a free software application in the Other subcategory, which is part of the Games & Entertainment category.
  • The application is currently available in English and was last updated on 2011-08-08. The program can be installed on all 32-bit MS Windows (95/98 / NT / 2000 / XP).
  • PC Assembly (version) is available for download from our website. Simply click on the green Download button above to begin. So far the program has been downloaded 671 times.
  • We have already verified that the download link is secure, however, for your own protection, we recommend that you scan the downloaded software with your antivirus.

(Download) NIOS:

Vocational Course Papers «Certificate in Computer Hardware Assembly and Maintenance»

  • The National Institute of Open Education (NIOS)
  • Vocational Courses Papers
  • Subject: Certificate in Computer Hardware Assembly and Maintenance (April 2010)
  • File size: 42.1 KB
  • File type: PDF

Computer Architecture Tutorials in PDF

Here you will get the material for courses and tutorials related to computer science and computer architecture.
The materials for which you will get PDF, DOC, PPT, RAR and ZIP files are basic mathematics, digital coding, flip-flops, microprocessors, machine language, assembly and many others.

Since these tutorials are included in many of the academic programs, you should get detailed information about them. It is not possible to browse the web for every small topic, you can download the PDF files for easy access to the information. In addition, the tutorials, corrected exercises and practical work will make it easier for you to understand each topic clearly.

The amazing thing about these materials is that they have been created by collecting data from different sources and are created in such a way that everyone can easily understand them. Whether you are a beginner or want advanced information on any of these computer architecture topics, you can visit this computer architecture topic to get a complete understanding. In addition, all the material can be downloaded for free from this website.

How to Learn Basic Computer Assembly

How to Assemble a Basic Desktop PC ?

This set of instructions will help you assemble a basic computer capable of running most modern software packages found by the casual user. Modern computers become more affordable when users supplement their monetary investment with a few hours of effort. This computer build will be very basic and will be the minimum hardware needed to have a functional system.

Once you have all the necessary parts and materials, it will take 2-4 hours to assemble your computer and you will need to be able to use simple hand tools, such as a screwdriver and a pair of pliers.

Step 1: Getting parts

First you must buy the parts needed to build the computer. The parts we will use in this project:

  • Processor (CPU)
  • Computer case
  • Optical drive (DVD RW and SATA)
  • Memory (RAM)
  • Power supply
  • SATA Cables
  • Motherboard (SATA compatible)
  • processor fan
  • Box Fan
  • Hard disk (SATA compatible)
  • Housing and drive screw assortment (Not shown)
  • Flowers (necessary if you are invading your partner’s space)

Most, if not all, of these parts can be purchased together in what is known as a «barebone kit».

In this case, the case, motherboard, CPU, hard drive and memory were purchased together at tigerdirect.com as a barebones kit for about $200. The DVD drive and cables were purchased at newegg.com for less than $30 prior to shipping.

There’s an obvious financial advantage to buying parts together, but less obvious is the benefit you’ll get from the amount of time you save by trying to research the compatibility of the parts. Caution: Check the manufacturer’s specifications on all items before you buy them. Kits are supposed to contain compatible parts, but errors can occur.

Step 2: Gather Tools and Supplies

Gather the tools you will need for the project:

  • Screwdriver (for slotted head and Phillips screws)
  • Wire cutters and strippers
  • Needlepoint Pliers
  • Knife for use
  • Small flashlight
  • Adjustable wrench
  • Small container to hold screws.
  • Composed of heat sink
  • Grounding strap

You may not use each and every one of these tools at every installation, but it is best to have them on hand in case you have a use for them.

Warning: Using the wrong tools for the job (such as turning a screw with a blade) can cause damage to the equipment and personal injury.

Step 3: Open the case or drawer

Open the computer case by removing the side panels. Find the screws holding the side panels in place and remove them. To remove the panel, first slide it back and then lift it out of the case.

Warning: The case may have sharp edges. Handle with care to avoid injury.

Step 4: Prepare the case for assembly

Three things must be done before assembly begins:

Remove any parts or packing materials that have been shipped inside the box.
Remove the cover of the optical drive. In our case, we will remove the cover of the highest drive compartment tomount our drive. Do this by pressing the retaining tabs.

Make a note of the cables pre-installed in the case. These should be the front panel connections for functions such as the power switch, audio jacks, and USB ports. If they are not labeled, consult the manufacturer’s documentation and label them now before installing other parts in the case.

Step 5: Ground yourself

Place the grounding strap on your wrist and connect the other end to the computer case. If your strap is not equipped with a clip to attach to the case, find a place to snap it onto the metal. This will prevent static electricity buildup on your body from damaging computer components.

Caution: Static electricity can damage computer components. Always use a grounding strap when handling internal components.

Step 6: Install the Motherboard

To install the motherboard, we need parts that should have been included with the purchased components:
I/O Bezel is an adjustment panel installed on the back of the case that surrounds the interface ports on the motherboard. It must be included with the motherboard. Figure 12 shows the contents of the mainboard case.

The spacers are installed in the case’s screw holes to create a lift that separates the case and the mainboard. The screws are installed in the spacers. The screws and standoffs should be included with the box, but it is a good idea to order these items if they are not included.

Follow these steps to install the motherboard in the case:

  • Install the I/O bezel plate into the opening at the back of the case. It is pushed from the inside.
  • Install spacers in the case. The standoffs are screwed into the mounting holes of the mainboard. Check the exact location of the screw holes on the mainboard.
  • Lower the mainboard into the case and align it with the I/O bezel.
  • Install the screws.
  • It is best to leave the screws loose until all of them are in place and the mainboard is aligned with the bezel.
  • Caution: To avoid damage to the motherboard, only the spacers and screws should come into contact. All spacers and screws must be installed.

Step 7: Install the hard disk

The hard drive is the device that stores all your data. It is 3.5″ wide and should be mounted so you can access the cable connections on the back. If that is not possible, you may need to connect the cables before installing the drive.

To mount the unit:

  • Find a 3.5″ drive bay to install the drive. If you have trouble finding a place to mount the drive, refer to the case documentation for suggestions.
  • Slide the drive into place until the screw holes on the sides line up with the holes in the case.
  • Install the screws.

Step 8: Install the optical drive

  • The optical unit has a width of 5.25″ and is installed in the unit compartment from which we removed the cover in an earlier step. Cable access considerations also apply to this drive. To install the drive:
  • Slide the drive into the drive compartment until the screw holes are aligned and the front of the drive is flush with the front of the case. Make sure it is oriented correctly.
  • Install the screws.

Step 9: Install the CPU

The CPU is the brain of the computer. It’s installed on the motherboard in the socket.

To install the CPU:

Find the corner mark that designates pin 1 of the CPU. On this AMD-branded processor, the corner is marked with an arrow. Refer to the manufacturer’s documentation for specific information about your processor.

Lift the small metal rod next to the socket. Locate the appropriate mark on the CPU socket and insert the CPU so that the marks are aligned.

Push the rod down to lock the processor in place.

Step 10: Install RAM

RAM is the temporary memory location from which the processor works. Permanently stored data is extracted from the disks and stored in RAM while the processor is working with it.

The memory is easy to install:

Place the RAM card in the socket. Verify that the notch on the card is in the correct location. If it is not, turn it 180º.

Press firmly on both ends of the board to place it in the socket. Make sure the tabs snap into place.

Caution: Pressing the boards when the tab is not aligned may damage the RAM cards as well as the motherboard.

Step 11: Install the CPU Fan

The CPU fan is actually a combination of a heat sink and a fan together. The unit extracts heat from the CPU.

To install the fan:

  • Place the thermal compound in the CPU by following the instructions provided with the compound.
  • Place the fan assembly in the CPU with the mounting tabs aligned.
  • Pull the locking rod down on the fan assembly to snap it into place.
  • Connect the power connector of the fan assembly to the motherboard. Refer to the manual to determine the proper placement.

Caution: If the thermal compound is not applied, the cooling and the mainboard will not be sufficiently damaged.

Step 12: Install the case fan

  • The housing fan is usually installed on the rear panel of the housing. If the fan bracket is not obvious, consult the case documentation. To mount the fan:
  • Align the mounting holes by attaching the fan to the mounting pad inside the case. The fan should be mounted so that air is drawn out of the case.
  • Insert the screws from the outside of the box and tighten.

Step 13: Install the complete power supply

Refer to your case documentation for details and then follow these instructions to install the power supply:
Align the mounting holes on the case and the power supply.
Insert the screws and tighten.

Step 14: Connect the cables

With all the components installed in the case, the cable jungle can be daunting. It is important to consult the motherboard manual to ensure the correct connections are made. There are two types of connections, power and data.

Every device that has been installed needs power. The motherboard has two power connections and there are two connectors specifically for SATA devices (drives). The other connectors will run fans and other non-SATA devices.

Data cables connect the drives and front panel devices to the motherboard. Refer to your motherboard documentation for the exact location of the connectors.

Warning: Incorrect connections may damage components and cause personal injury.

Step 15: Closing

Now that the components are fully installed, the last thing you need to do is reinstall the side panels into the box.

The computer is now ready to be turned on and to have software loaded into it. If the computer has trouble starting up, check all component connections and mounting to make sure you have connected everything correctly.

Refer to the manuals of the individual components for specific troubleshooting information if the problems persist.

Computer Assembly Courses in the United States

Computer Architecture

Princeton University

In this course, you will learn how to design the computer architecture of complex modern microprocessors.

  • All of the features in this course are available free of charge. It does not offer a certificate upon completion.
    100% online
  • Start right away and learn at your own pace.
  • Flexible deadlines
  • Advanced level
  • Approx. 17 hours to complete
  • Suggested: 3 hours / week.
  • Subtitles: English.

Associate in Applied Science in Computer Maintenance Technology

Alamo District School

  • Duration 60 credit hours.
  • Associate in Applied Science in Computer Maintenance Technology with Cisco Specialization
  • Alamo District School
  • Duration 60 credit hours.

Computer Maintenance and Repair Course

  • Nassau Community College
  • Duration 64 credit hours

Computer Assembly Courses in Mexico

Intensive Computer Assembly and Repair Course

  • Center: Dot Inkjet
  • Place: Puebla Capital
  • Type: Courses.

Computer and Printer Equipment Maintenance Course

Centre: CENE

T Online and Face-to-Face University

  • Resolve all kinds of problems with computer equipment, both hardware and software of the different platforms on the market.
  • With this course you will be able to solve problems as simple as recovering a file, undoing a sheet or even assembling, installing and configuring a complete operating system.
  • Place: Puebla Capital

Free Course to Install and Repair Computers

Job training courses are intended to help you get a job

  • Train yourself for employment is a platform of the Carlos Slim Foundation from which you can access free courses of different trades.
  • The training courses for employment are intended to help you get a job.
  • These courses are 100% online, free and they give you a recognition that will allow you to accredit your learning, once you have finished your course; you can take them at your own pace and time, that is, you decide the way you advance in your training
  • One of the courses you can take at Capacítate para el empleo is that of Computer Equipment Installation and Repair Technician.
  • In this course you will learn about computer parts and peripherals, computer motherboard components, creating FAT32 and NTFS partitions, installing operating system software and drivers, and formatting computers.
  • Information recovery from hard disk damage, data backup, types of motherboards and hard disks, preventive maintenance of computers, computer assembly, among many other aspects.

Computer and Cell Phone Repair Course

Available at CDMX Centro and Ecatepec

  • The use of computers is related to practically all activities of daily life.
  • That is why it is important that people learn to use this tool to take advantage of it and use the computer and the Internet as a tool for communication, research, study and, not least, entertainment.
  • The functions that a computer can perform are many, as well as the failures that can originate both at the hardware and software level, so it requires trained personnel for repair and service.

Computer Assembly Courses in Puerto Rico

Computer Repair Technician

Computer Technical College

Without a doubt, Computer Repair Technician is one of the professions of the present and the future.

We at CTC integrate you into the passionate business of designing, assembling, maintaining and repairing computers. You will also acquire knowledge about the functions and structure of Windows operating systems.

Also included are notions of networks, wiring and the Internet . Fully interactive course. The course is fully updated with the latest technological advances.

  • The PC Repair Technician is one of the most requested professions nowadays.
  • Duration: 42 hours offered in 14 sections of classes of 3 hours each.
  • Cost: $ 630.00 – Regular Price
  • Tuition $ 25.00
  • We are licensed by the General Council of Education of Puerto Rico (V 14-70) and we are a member of the Microsoft MSDN Academic Alliance .

Computer Technician

Intertec, Puerto Rico

  • The Computer Technician Certificate offers the student a basic preparation for the use of computers in technical and professional areas. It includes general knowledge of the organization, architecture, operation and programming of computerized systems.
  • This certificate provides the student with the knowledge for the management and operation of the computer and the development of the skills for the application of computer programs of greater demand in the industry, commerce and education, among others.
  • The program has a practical-theoretical content that allows the student to continue studies and develop in the field of information systems. Concentration courses must be approved with a minimum grade of C. The Fajardo and San Germán campuses are authorized to offer this program.

Computer and Network Repair Technician

School of Technical Programs

  • Duration of the programme
  • 8 months, 36 credits

Description:

  • Technical training to provide the graduate with the knowledge and skills to work as a Computer and Network Repair Technician.
  • You will learn how to assemble, install, configure and maintain computers, peripherals and network equipment, handle Windows and DOS operating systems.
  • Diagnose and repair software and/or hardware problems, back up to tape and recover lost files, manage anti-virus programs, remove unwanted file systems, maintain maintenance records, equipment inventories and licensing.
  • As well as supporting staff in the use of network and peripheral equipment and making recommendations for equipment, software and system improvements to a business.

Computer Assembly Courses in Canada

Computer Repair and Maintenance Courses

University of Ontario

Computer repair and maintenance programs at Ontario’s universities have practical and theory-based courses that result in strong technical and interpersonal skills.

In both lectures and laboratories, students learn personal computer (PC) and network theory, then apply their knowledge in simulated situations.

Throughout the program, students learn how to troubleshoot, configure and repair:

  • Hardware
  • Networks
  • Software
  • Websites
  • Operating systems

Computer repair and maintenance programs will also give you a basic understanding of how to customize your computer hardware to match your business needs.

General Computer Repair and Maintenance Program Requirements

  • The University of Ontario computer repair and maintenance programs require an Ontario Secondary School Diploma (OSSD) or equivalent.
  • Grade 12 in English and grade 11 or 12 math credit may also be required. English and mathematics equivalency tests may be available if you do not meet the admission requirements.

Computer Services Technician

Program information and Admission requirements:

  • Grade 12 or equivalent status or mature student Courses are open to any applicant who has a good command of English and can follow instructions.
  • An admissions interview will be conducted to determine if the applicant has the interest, motivation, and skills necessary to participate in this program.
  • Full-time students must attend the required hours per week according to the course schedule and may do so at times that are convenient for them.

Computer Assembly Courses in Argentina

PC Assembly and Repair

This course aims to meet the growing needs of the market in terms of training users and professionals for the maintenance, assembly and repair of PCs.

To train computer users with knowledge, techniques, tools and skills to perform in the current labor market, giving immediate response to the high demand for professionals in technical areas specialized in the handling and repair of hardware and software installation.

To train technicians who have the capacity to update themselves in new technologies, concerning hardware and software. To train home users with methods, criteria and tools to make a good maintenance of their equipment and to be able to build their own computer as they like, analyzing prices and performances.

The courses are given in groups of up to 24 students. In this way, all students incorporate the knowledge through theory and practice. Once the course is finished, the student receives the «Attendance Certificate» of the course, and when he takes the exam he is given the «Passing Certificate».

  • Duration 48 hours
  • Medrano 951 – 2nd floor – OF. 206
  • City of Buenos AiresPhone: (011) 4867-7545
  • info@sceu.frba.utn.
  • edu.ar.

PC Technical Support Course

  • Center: Capacitech
  • Method: Face to face
  • Place: Monserrat
  • Type: Courses
  • Duration: 36 hours 12 classes
  • Weekly load: 3 hours each meeting.

General objectives:

The objective is that the student who graduates is trained in a growing and highly demanded profession. The preventive and corrective maintenance of computers, as well as the correct election in the purchase of a computer.

Free Computer Assembly Course

Fidelitas University

General Objective:

Develop the technical skills necessary for students to provide maintenance and repair of computer equipment.

Aimed at:

General public over 15 years old, who have completed the basic general education cycle (9th year) with interest in the areas of computer science and computing, especially in the area of maintenance and repair of basic computer equipment.

  • Central: +506 2206-8600
  • First Login: +506 2206-8607
  • info@ufidelitas.ac.cr.

Computer Assembly Courses in Chile

  • Computer Support (Santiago, RM Santiago de Chile)
  • ICEL Educational Group

Title offered: Tecnico de Nivel Superior en Soporte Computacional.

General Objectives

  • Acquire the knowledge to analyze and solve problems involving the operation and performance of communication technologies.
  • Perform maintenance and support functions in equipment.

Computer Support (Macul, RM Santiago de Chile)

  • Inacap – Universidad Tecnológica de Chile

Degree offered: Superior Level Computer Support Technician.

Career Description: The career includes a specialty training area where the techniques to give support to computer systems and users are taught; basic disciplines area, management area and general training area.

  • Study PC assembly and repair in Macul
  • ICCE Autonomous Technical Training Centre

Training Course in Computer Assembly and Repair – Santiago – Metropolitan Santiago

  • Centre: ICCE Centro de Formación Técnica Autónomo

Certificate of Attendance: At the end of the course the participant will be able to identify parts and pieces that make up a computer, in order to detect faults in its operation for subsequent replacement.

Computer Assembly Courses in Spain

Computer Equipment Configuration and Verification

  • Training Secretary CS CCOO in Valencia
  • Subsidized to workers
  • Duration 40h

Course objective: to install, configure, assemble and repair computers, peripherals and printers.

Aimed at: Active workers who carry out their work activity in the area of the Valencian Country

  • Sagunto Port
  • C/ Treball, 18, 46520, Valencia, Spain
  • Valencia
  • 5 Naples and Sicily Square, 46003, Valencia, Spain

Cisco Computer Maintenance and Repair

  • Duration of the course: 225 hours approx.
  • Title of Ceintec’s own CISCO COMPUTER MAINTENANCE AND REPAIR
  • Requirements: No initial knowledge required

Objectives: Computer Maintenance and Repair is a totally practical course where the student learns to assemble, repair and maintain PCs.

It follows the CISCO IT ESSENTIALS program and is essential both for working in the computer maintenance and repair sector and for preparing for the CompTIA A+ certification.

  • CEINTEC Centre for the Introduction of New Technologies
  • Calle Ercilla, nº 42 48011 Bilbao (Galerias Isalo) Vizcaya
  • (Next to Metro Indautxu) Spain.

Inem 2019 Advanced Computer Installation, Maintenance and Repair Technician Course: Remote Software and Hardware

  • Inem Distance Learning Course
  • Study hours 420 hours

Free Course for Students in Spain

Concepts you will learn:

To work as a maintenance technician on both hardware and software computers. Our interest is that this training can be carried out both by students currently unemployed and by active workers in the working world.

Computer Assembly Courses in Colombia

Computer Assembly and Maintenance Course in Bogotá D.C.

  • Pontifical Javeriana University

Learn about personal computer technology, assemble your computer, perform updates, do maintenance.

Repair and upgrade any desktop or laptop computer, learn how to configure a network from scratch, also know about optimization, installation and repair of operating systems.

Aimed at:

  • All people interested in acquiring the knowledge and skills to repair, upgrade and configure computers.

Computer Assembly and Maintenance

Objective: To train in the recognition and testing of computer parts, the assembly of these from their parts, the preparation of disks for the installation of Windows and Linux operating systems and in the diagnosis and maintenance of hardware and software.

Aimed at: Engineers, technicians, professionals, students, young people and adults who know how to use the computer and want to learn how to maintain, partition and format the hard disk to install operating systems, applications, update, add peripherals, etc.

  • Barbosa: Race 9 # 10 – 25 2nd Floor
  • Phone 7486164 – 7486371 – 3103432740 whatsapp
  • barbosa@si.edu.co
  • Barrancabermeja Carrera 15 No. 49 – 15 Barrio Colombia
  • Phone 6221383 – 3157193637-3123973457 whatsapp

PC and Laptop Assembly and Maintenance

  • Storage units
  • Hard drive, HD, DVD, DVD-Room and Blue Ray, pendrives
  • Duration: 55 academic hours (Academic hour = 45 minutes)
  • Price: $ 435,000
  • Category: Infrastructure

The basic concepts of Computer science and systematization are worked, a recognition of the parts of the PCs, Laptops and Servers is made, such as cards, boards, processors, memories, hard disks, peripherals, etc.

The new technologies are reviewed, basic electronics; handling of the multimeter, real practices of assembly and maintenance of equipment are made, preparation of disks, installation of operating systems (Windows and Linux).

Installation of drivers, conflict and problem resolution, installation of applications, work with diagnostic tools and correction of software and hardware.

INTECAP® – Technical Training Institute

Carrera 13 # 65 – 42 3rd Floor Bogotá D.C. – Colombia.

Computer Assembly Courses in Venezuela

Computer Maintenance and Repair

  • American Academy

PROGRAMMATIC CONTENT:

  • Computer Structure
  • Processors
  • Reports
  • Mass Storage Device
  • Optical Units
  • Peripheral Devices
  • Computer Assembly
  • Computer Electronics
  • Equipment Configuration
  • Utility Programs
  • Technical or Diagnostic Equipment
  • Maintenance Techniques
  • Equipment Optimization
  • Occupational Safety Standards

Technician’s Professional Profile

Course counts with:

  • Operating Computers
  • System installation discs
  • External CD/DVD ROM drive
  • External Hard Drive
  • Video Beam
  • Pc for Instructor
  • Board
  • Oral Evaluation
  • Practical Evaluation
  • Central and Candelaria Headquarters.
  • CCs Venezuela.

Computer Center – Courses

The Computer Center is pleased to announce the opening of the «Computer Assembly, Configuration and Maintenance» course. More information: http://www.ciens.ucv.ve/ciens/cc/cursos/.

Central University of Venezuela.

PC Maintenance Course

Learn how to repair your computer, remove viruses, format it, install Windows and programs. How to repower computers and change components.

General information:

  • Technical Support is a range of services that provide assistance with a computer’s hardware or software, or other electronic or mechanical device related to it.
  • In general, technical support services try to help the user solve various problems associated with the operation of the computer, such as: replacement of parts, installation of operating systems, anti-virus, etc.

General objective of the course:

  • Assemble and disassemble new or used computers, installation of Windows and Linux, of utility programs and solve typical problems in the use of the computer.

Who it is aimed at:

Any person with knowledge in the use of the computer, with a lot of curiosity and with skill in manual tasks, who wants to get into the business of computer technical support or who does not want to depend on another person to repair their PCs

Address:

Av. Pedro León Torres con calle 59, C.C. Sotavento, Piso 2, Local 27, Barquisimeto Estado Lara, Venezuela.
Telephone
+58 (0251) 717.92.47
+58 (0251) 435.25.82

Write to us:

cadi@cadif1.com
twitter.com/cadif1

Free Online Assembly and Networking Course Subjects:

1.- Computer Assembly and Maintenance:

  • COMPUTER ASSEMBLY, MAINTENANCE, AND CONFIGURATION GUIDE
  • BASIC TERMINOLOGY
  • PARTS OF A COMPUTER

Case: This is the metal box where the electronic components that make the computer work are located. Sometimes called a CPU, this case is available in two models:

MOTHERBOARD

It is the main card of the computer, it is a bakelite sheet formed by a set of integrated circles and designed to perform various tasks (this set of circuits is called chipset), the main components of the chipset are: the processor or CPU, BIOS (Basic Input Ouput System), memory, ports (parallel and serial), slots or expansion slots and connections of peripherals or other devices such as keyboard and disk drives or drives.

Some of these components on the card are removable and can be replaced or upgraded.

Two types of motherboards can be found today:

  • AT (Advanced Technology) and ATX (Advanced Technology Extension) cards.
  • AT cards are characterized by a socket or connector of the microprocessor called Socket 7, which were used by the first models of Pentium microprocessors that came to market.

They also had memory banks for SIMM modules.

The most recent models of this card (AT) brought Socket 370 for more powerful Pentium microprocessors and memory bank for SIMM module and 72-contact DIMM modules…..

2.- Computer Networks:

COMPUTER NETWORKING COURSE:

Local Area Networks.

A network, then, consists of one or more computers connected by a physical medium and running software that allows them to communicate with each other, in order to share resources.

Topologies.

Also, the different components that are going to form a network can be interconnected or joined in different ways, being the chosen form a fundamental factor that is going to determine the performance and functionality of the network. However, the arrangement of the different components of a network is known as the network topology.

The ideal topology for a specific network will depend on different factors, such as the number of machines to be interconnected, the type of access to the physical environment that we want, etc.

Star:

Local area network in which each device, called a node, is connected to a computer or host computer with a star-shaped configuration (topology). Normally, it is a network that consists of a central device (the hub) and a set of connected terminals.

In a star network, messages are passed directly from one node to the hub, which manages the redistribution of information to the other nodes. The reliability of a star network is based on the fact that one node can fail without affecting the other nodes in the network. However, its weak point is that a failure in the hub irremediably causes the whole network to fail.

Ring:

Local area network in which the devices, nodes, are connected in a closed loop or ring. The messages in a ring network are passed from one node to another in a specific direction. As a message travels through the ring, each node examines the destination address attached to the message.

If the address matches that of the node, the node accepts the message. Otherwise it will regenerate the signal and pass the message to the next node in the loop. This regeneration allows a ring network to cover greater distances than star or bus networks.

Related Topics

Other Topics of Interest in ALPHAPEDIA

IMAGEN DE LA BIBLIA / BIBLE IMAGE

MICAH 2

Chapter Contents The sins and desolations of Israel (1-5) Their bad practices. Leer más

IMAGEN DE LA BIBLIA / BIBLE IMAGE

DEUTERONOMY

Meaning of Deuteronomy Deuteronomy, Hebrew Devarim, («Words»), fifth book of the Old Leer más

IMAGEN DE LA BIBLIA / BIBLE IMAGE

MICAH 3

The third chapter contains a pathetic invective against the princes of the Leer más

IMAGEN DE LA BIBLIA / BIBLE IMAGE

MICAH 6

Chapter Contents God’s controversy with Israel. (1-5) The duties that God requires. Leer más

IMAGEN DE LA BIBLIA / BIBLE IMAGE

MICAH 7

Chapter Contents The general prevalence of evil. (1-7) Trust in God and Leer más

IMAGEN DE LA BIBLIA / BIBLE IMAGE

MICAH 5

Chapter Contents The birth of Christ and the conversion of the Gentiles. Leer más

Image of COMPUTER ASSEMBLY COURSE

IMAGEN DE ENSAMBLAJE DE COMPUTADORAS / Image of COMPUTER ASSEMBLY COURSE